Filter
Top Products
SPI9000 Inverter Unit FI9 – FI14 User Manual
MN04004002E
For more information visit: www.EatonElectrical.com 5-17
September 2006
Selection of Language
The control keypad offers you the possibility to control the inverter through the keypad in the
language of your choice.
Locate the language selection page under the System menu. Its location indication is S6.1.
Press Menu Button Right once to enter the edit mode. As the name of the language starts to
blink you can select another language for the keypad texts. Confirm with the ENTER button.
The blinking stops and all text information on the keypad is presented in the selected
language.
You can return to the previous menu any time by pressing Menu Button Left.
Figure 5-11: Selection of Language
Application Selection
The user can select the desired application on the Application selection page (S6.2). To enter
the page, press Menu Button Right on the first page of the System menu. To change the
application, press Menu Button Right once more. The name of the application starts to blink.
Now you can browse the applications with the Browser buttons and select the desired
application with the ENTER button.
After application change, you will be asked if you want the parameters of the new application
to be uploaded to the keypad. If you want to do this, press the ENTER button. Pressing any
other button leaves the parameters of the previously used application saved in the keypad.
For more information about the application, see the application manual.
Figure 5-12: Change of Application
Language
Language
English
System Menu
M6
S1 S11
English
Langue
Francais
Application
Application
Standard
System Menu
M6 56.2
56.2 56.2
S1 S11
Standard
Application
Multi-step