Filter
Top Products
SPI9000 Inverter Unit FI9 – FI14 User Manual
5-20 For more information visit: www.EatonElectrical.com MN04004002E
September 2006
Parameter Comparison
In the Parameter Comparison submenu (S6.4), you can compare the actual parameter values
to the values of your customized parameter sets and those loaded to the control keypad.
You can compare the parameter by pressing Menu Button Right in the Compare Parameters
submenu. The actual parameter values are first compared to those of the customized
parameter Set1. If no differences are detected, “0” is displayed on the lowermost line. If any
of the parameter values differ from those of Set1, the number of the deviations is displayed
together with symbol P (for example, P1➔P5 = five deviating values). By pressing Menu
Button Right once more, you can enter pages where you can see both the actual value and
the value it was compared to. In this display, the value on the description line (in the middle)
is the default value and the one on the value line (lowermost) is the edited value.
Furthermore, you can also edit the actual value with the Browser buttons in the edit mode
which you can enter by pressing Menu Button Right once.
Figure 5-15: Parameter Comparison
Set1
Or
0
56.4.1
Set1
56.4.1
P2.1.2= 50.0
56.4.1.1
ParamComparison
56.4
Confirm Change
Edit Value
C1 C3
P1 P6
P2.1.2= 50.0
56.4.1.1
20.0 Hz
20.0 Hz