Filter
Top Products
SPI9000 Inverter Unit FI9 – FI14 User Manual
MN04004002E
For more information visit: www.EatonElectrical.com 5-23
September 2006
Multimonitoring Items (P6.5.4)
The alphanumeric keypad features a display where you can monitor up to three actual values
at the same time — see Monitoring Menu (M1) on Page 5-7 and the manual of the application
you are using. On page P6.5.4 of the System Menu, you can define whether the operator can
replace the values monitored with other values. See below.
Figure 5-19: Disabling the Change of Multimonitoring Items
Keypad Settings
In the Keypad Settings submenu under the System menu, you can further customize your
inverter operator interface.
Locate the Keypad Setting submenu (S6.6). Under the submenu, there are four pages (P#)
associated with the keypad operation:
Figure 5-20: Keypad Settings Submenu
Default Page (P6.6.1)
Here you can set the location (page) to which the display automatically moves when the
Timeout Time (see below) has expired or the power is switched on to the keypad.
If the default page is 0, the function is not activated, i.e. the latest displayed page remains on
the keypad display. Pressing Menu Button Right takes you to the edit mode. Change the
number of the Main menu with the Browser buttons. To edit the number of the submenu/
page, press Menu Button Right. If the page you want to move to by default is at the third
level, repeat the procedure. Confirm the new default page with the ENTER button. You can
return to the previous menu at any time by pressing Menu Button Left.
Figure 5-21: Default Page Function
Multimon. items
56.5.4
ChangeEnable
Multimon. items
56.5.4
Multimon. items
56.5.4
ChangeDisableChangeEnable
Default page
0.
Keypad settings
5.6.6 P6.6.
P1 P5
Confirm Change
Cancel
Repeat to Set
Default Submenu/Page
Default page
0.
P6.6.
Default page
P6.6.
0.
Default page
P6.6.
1.