Filter
Top Products
ERX 8.0.x Hardware Guide
CAUTION: Do not chang e the IP address for the Ethernet interface that you are
using to commun
icate with the system. If you change the address, you will lo se the
Telnet session.
SNMP
The system supports Sim ple Network Managem ent Protocol (SNMP),
astandardma
nagement protocol for IP networks. You can configu re
the system as an S N MP agent.
As an S N M P agent, the system provides access to manageme nt information
that it maintains. See JUNOS e System Basics Configuration Guide, Chapter 4,
Configuring
SNMP for information on SNMP. See JUNOSe Command Reference
Guide A to M and JUNOSe Command Reference Guide N to Z for the commands
that are available for configuring the system as an SNMP agent.
The Next Step
See “Maintaining ERX Routers” on page 85.
82 The Next Step