Juniper Networks 8 Router User Manual


 
Cable Pinouts
Figure 54: CT1 I/O Module Ports
PIN 1
PIN 8
Port 0
Port 1
Port 2
Port 3
CT-1
I/O
g013773
Ta bl e 23 l
ists the pinout for the CT1/CE1 connector.
Table 23:
CT1/CE1 I/O Module—RJ-48C Connector Pinout
Pin Signal
1RXRing
2RXTip
3
no connect
4
TX Ring
5TXTip
6
no connect
7
no connect
8
no connect
For CE1 I/O modules with Telco connectors, the other ends of the cables are
attached to a balun panel that splits the signals from two Te lco connectors to
20 pairs of BNC connectors. We supply the Telco cables if you purchase a
balun panel. Figure 55 shows the location of the Telco connectors on a CE1
I/O module and the sequence of the pins in the connectors.
CT1 and CE1 I/O Modules 147