Filter
Top Products
ERX 8.0.x Hardware Guide
1. Cut the two straps that secure the carton to the skid, open the carton from the
top, and remov
e the box of accessories that sits on top of the router.
2. Unlock the four plastic clips that hold the box to the skid by squeezin g them in
their center a
nd pulling out, and then lift the carton off the router.
3. Remove the three screws that attach each of the two L-brackets to the router.
4. To avoid scratching the router when removing it from the skid, detach one of
the L-brackets from the skid by removing the three screws. See Figure 13.
Figure 13: Re
moving an L-Bracket
L-bracket
g013739
Unpacking ERX-7xx Models and ERX-310 Routers
ERX-7xx models and ERX-310 routers are shipped boxed, but not attached
to a ski
d. For your convenience, we recommend that you unpack the
router in the location w he re you want to install it.
To unpack an ERX-7xx model or an ERX-310 router:
1. Open the carton from the top.
2. Remove
the box of accessories that sits on top of the system.
3. Remove the router from the box.
24 Unpacking ERX-7xx Models and ERX-310 Routers