Filter
Top Products
INSTALLATION
AAA-2 AAA-2
DC CURRENT RANGE
Fine Adjustment in each Range
40-300 Amps
DUTY CYCLE
60%
60%
RATED DC OUTPUT*
VOLTS @ RATED AMPS
Lincoln Plus Rating
40V @ 200A
NEMA Rating
28V @ 200A
PIPELINER® 200G
1. Output rating in watts is equivalent to volt-amperes at unity power factor. Output voltage is within ± 10% at all loads up to
rated capacity. When welding, available auxiliary power will be reduced.
Make/Model Description Speed (RPM) Displacement Ignition Capacities
cu. in. (Ltrs.) System
High Idle 1600 Delco Voyager Fuel: 15gal.(57L)
4 Cylinder High Energy
GM 4 Cycle Oil: 4.5Qts.(4.3L)
3.0 Liter Full Load 1600 Distributor Type
Pipeliner® 200G 183.0(3.0) Electronic
(K6090-7) 46 HP @
1600 RPM Low Idle 1360
INPUT - GASOLINE ENGINE
RATED OUTPUT - WELDER
HEIGHT WIDTH DEPTH WEIGHT
40.94** in. 24.00 in. 68.16in.
1039.9 mm 609.6 mm 1731.0 mm 1295.0 lbs. (587kg.)
**Top of enclosure, add 4.6” (116.8mm) for exhaust
OUTPUT - GENERATOR
Auxiliary Power
1
1.75 kW, 15 Amps @ 120V DC
PHYSICAL DIMENSIONS
ENGINE OPERATING LOAD FUEL CONSUMPTION
Coolant: 9.9 Qts.
(9.4L)
TECHNICAL SPECIFICATIONS - Pipeliner® 200G (K6090-7)
DESCRIPTION
200 Amp DC Welder
All Copper Windings
Pure DC Power
Generator
Low Idle (1360 RPM)-No Load
High Idle (1600 RPM)-No Load
DC Auxiliary-128 Volts-15 Amps-1600 RPM
50 Amps @ 38 Volts @ 60% Duty Cycle
100 Amps @ 34 Volts @ 60 % Duty Cycle
150 Amps @ 29 Volts @ 60% Duty Cycle
200 Amps @ 40 Volts @ 60 % Duty Cycle
.7 gal/hr (2.8 ltrs/hr)
.8 gal/hr (3.1 ltrs/hr)
1.1 gal/hr (4.0 ltrs/hr)
1.04 gal/hr (3.94 ltrs/hr)
1.12 gal/hr (4.25 ltrs/hr)
1.15 gal/hr (4.37 ltrs/hr)
1.34 gal/hr (5.07 ltrs/hr)
Return to Section TOC Return to Section TOC Return to Section TOC Return to Section TOC
Return to Master TOC Return to Master TOC Return to Master TOC Return to Master TOC