Filter
Top Products
17
[Setting example]
After power ON, changing from 0.00 display to change the A002 (Run command source)
data.
Function code dxxx are for monitor and not possible to change.
Function codes Fxxx other than F004 are reflected on the performance just after changing the data
(before pressing SET key), and there will be no blinking.
A001
A002 02
Display is solid lighting.
01
F001
d001
0.00
Data of d001 will be shown on the
display after the first power ON
Press [ESC] key to show
the function code
Press [ESC] key to move
on to the function group F001
Press [ESC] key Once to move
on to the function group A001.
Press Up key to change increase
function code (A001
A002)
Press SET key to display the data of A002
Press SET key to set
and save the data
When data is changed, the display
starts blinking, which means that new
data has not been activated yet.
ESC
U
V
SET
ESC
ESC
SET
ESC
U
V
:Fix and stores the data and moves back to the function code
:Cancels the change and moves back to the function code
SET
ESC
SET
Press up key to increase the
data (02 01)