Hitachi hitachi series inverter Welding System User Manual


 
47
“d” Function
Func.
Code
Name Description
Run
Mode
Edit
Units
D006
Intelligent output
terminal status
Displays the state of the intelligent
output terminals:
D007
Scaled output frequency
monitor
Displays the output frequency scaled
by the constant in B086.
Decimal point indicates range:
0 to 3999
Hz times
constant
d008
Actual frequency monitor Displays the actual frequency, range
is -400 to 400 Hz
Hz
d009
Torque command monitor Displays the torque command, range
is -200 to 200 %
%
d010
Torque bias monitor Displays the torque bias value, range
is -200 to 200 %
%
d012
Output torque monitor Displays the output torque, range is
-200 to 200 %
%
D013
Output voltage monitor Voltage of output to motor,
Range is 0.0 to 600.0V
V
d014
Input power monitor Displays the input power, range is 0
to 999.9 kW
KW
d015
Watt-hour monitor Displays watt-hour of the inverter,
range is 0 to 9999000
D016
Elapsed RUN time monitor Displays total time the inverter has
been in RUN mode in hours.
Range is 0 to 9999 / 1000 to 9999 /
100 to 999 (10,000 to 99,900)
hours
D017
Elapsed power-on time
monitor
Displays total time the inverter has
been powered up in hours.
Range is 0 to 9999 / 1000 to 9999 /
100 to 999 (10,000 to 99,900)
hours
D018
Heat sink temperature monitor Temperature of the cooling fin, range
is -20~150
°C
d022
Life check monitor Displays the state of lifetime of
electrolytic capacitors on the PWB
and cooling fan.
d023
Program counter monitor
[EzSQ]
Range is 0 to 1024
d024
Program number monitor
[EzSQ]
Range is 0 to 9999
d025
User monitor 0
[EzSQ]
Result of EzSQ execution, range is
–2147483647~2147483647
d026
User monitor 1
[EzSQ]
Result of EzSQ execution, range is
–2147483647~2147483647
d027
User monitor 2
[EzSQ]
Result of EzSQ execution, range is
–2147483647~2147483647
Lifetime expired
Normal
Electrolytic caps
Cooling fan
ON
OFF
Relay
12 11