Filter
Top Products
11.. . APPENDIX A: MASTER ICON FILE REFERENCE
USING THE OMP-MODL11-52
Clear Sample Count and Average upon Enable: Check this box to force a reset of
the Average calculation as well as the Sample count used used for the
calculation upon receipt of an Enable signal.
If this box is not checked, upon receipt of an Enable signal, the Average
calculation will proceed from its suspended state (that it entered when it
was disabled).
Units: Provides a text box for User entry of a units label that will be shown at the
output from this icon.
Output Name: Specify the label for the Output. This name will show directly
under the Output terminal within the Program Net.