Filter
Top Products
11.. . APPENDIX A: MASTER ICON FILE REFERENCE
USING THE OMP-MODL11-62
ICON CONFIGURATION DIALOG BOX:
CONFIGURATION OPTIONS:
Icon Name:Specify the label for the icon. This name will show directly under the icon
within the Program Net.
Input Rate Timebase: Units per...
Specify the timebase (ie units per second, per minute, etc) for which
the input signal rate is specified. By providing this information, the Net
will automatically calculate the correct unit volume output based on the
integration period. In the above example, the flow rate was in GPM.
With a 1 hour integration period specified (by the User connected Rate
Clock), the Net will automatically generate the correct volume output.
If a timebase other than seconds, minutes, hours, or days is used, the
rate (Integral icon input) can be scaled by a math icon prior to
connection to the Integral icon to bring the timebase within the possible
timebase selections.
Units: Provides a text box for User entry of a units label that will be shown at the
output from this icon.
Output Name: Specify the label for the Output. This name will show directly
under the Output terminal within the Program Net.