A SERVICE OF

logo

Open as PDF
next previous
2 – 10
Position the push rollers over the grit rollers to grip each edge of the medium.
To move the push rollers, the media set lever must be in the lowered position.
If the “REALIGN ROLLERS” message is displayed when the medium is loaded
and the media set lever is raised, either the right-hand push roller is not positioned
over the right-hand wide grit roller, or the left-hand push roller is not positioned
over the grit roller. Check to confirm that they are positioned correctly.
For the Tempo 600
• The push roller (1) must be positioned over the right-hand wide grit roller.
• The medium must always be positioned over the media sensor.
CAUTION
CHECKPOINT
Media sensor
Push roller (1)
Push roller (2)
Grit roller
Medium
OK OK
CAUTION