A SERVICE OF

logo

Open as PDF
next previous
4 – 10
The drawing origin point following reading of the registration marks will be at the bottom-right registration
mark, as shown below.
■ Registration-Mark Menu Tree
Drawing Origin Point
Registration-mark pattern 1
Medium feed direction
Registration-mark pattern 2
Origin point
Origin point
X
Y
MARK MODE
MARK POSITION
MARK TYPE
MARK SIZE
MARK DIST. ADJ.
MARK OFFSET
MARK SENSOR ADJ1
MARK SENSOR ADJ2
MARK AUTO SCAN
MARK SENSOR ADJ
FEED
MOVE TO R. MARK
AUTO PRE FEED
TANGENTIAL
AUTO REG. MARK
CLEAR BUFFER
AXIS ALIGNMENT
DISTANCE ADJUST
PAGE LENGTH
PLOT AREA
EXPAND
ROTATE
MIRROR
COPY
SORT
RS-232C
COMMAND
BLADE WEAR SETUP
PEN UP/DOWN
TEST
PEN UP SPEED
OFFSET FORCE
OFFSET ANGLE
STEP PASS
INIT. DOWN FORCE
LENGTH UNIT
Key
Setting the Registration-Mark Mode
Setting the Registration-Mark Detection Movement Distance
Setting the Registration-Mark Pattern
Setting the Registration-Mark Size
Setting the Registration-Mark Distance Adjustment
Setting the Registration-Mark Origin Point
Adjusting the Registration-Mark Reading Sensor (1)
Adjusting the Registration-Mark Reading Sensor (2)
Setting the Registration-Mark Auto-Scan Mode
Adjusting the Sensitivity of the Registration-Mark Sensor