Agilent Technologies E4440A Saw User Manual


 
142 Chapter2
Instrument Functions: A - L
File
Instrument Functions: A - L
2.5.2.4 Source
Whenthefiletypeissetto
Trace,thiskeyallowsyoutosavetrace1, 2, 3 or All.Savingtrace
All saves all traces in a single.TRC file.
Whenthefiletypeissetto
Corrections, Source accesses the Antenna, Cable, Other and User
menu keys, which allow you to select the type of correction to be saved.
Whenthefiletypeissetto
Limits, Source accesses the Limit 1 and Limit 2 menu keys. Limit 1
and Limit 2 provide data sets to determine whether a trace has exceeded preset
specifications. Limit sets can hold up to 200 points and can only be saved individually.
For any other Save type,
Source is disabled (greyed out).
Key Path:
File, Save
State Saved: Source is not saved in Instrument State.
Factory Preset:
Source survives Factory Preset and *RST,butissettoAll Traces at power up.
2.5.2.4.1
Trace 1
Selects trace 1 to be saved.
Key Path:
File, Save, Source
2.5.2.4.2 Trace 2
Selects trace 2 to be saved.
Key Path:
File, Save, Source
2.5.2.4.3 Trace 3
Selects trace 3 to be saved.
Key Path:
File, Save, Source
2.5.2.4.4 All Traces
Selects all the traces to be saved.
Key Path:
File, Save, Source