Filter
Top Products
368 Chapter5
One-Button Measurement Functions
Trace/View (ACP Measurement)
One-Button Measurement Functions
5.7.3 Combined
Pressing Combined selects the measurement to be displayed as a bar graph and spectrum as
shown below.
Key Path:
Trace/View
Factory Preset: Spectrum
History: Added with firmware revision A.02.00
Remote Command:
There is no remote command for this function.
5.7.4 Combined View Units
Pressing Combined View Units selects the units (dBc or dBm) for the floating numeric displays
when
Combined is selected.
Key Path:
Trace/View
Factory Preset: dBc
History: Added with firmware revision A.02.00
Remote Command:
There is no remote command for this function.
5.7.5 Trace
One-button measurements do not change this function. See “Trace” on page 284 for more