Filter
Top Products
Chapter 5 499
One-Button Measurement Functions
Meas Setup (Spurious Emissions)
One-Button Measurement Functions
Increment: 10
Range: –180 dBm to 20 dBm
Remote Command:
[:SENSe]:SPURious:POWer[:RF]:LEVel <integer>
[:SENSe]:SPURious:POWer[:RF]:LEVel?
[:SENSe]:SPURious:POWer[:RF]:RANGe:AUTO OFF|ON|0|1
[:SENSe]:SPURious:POWer[:RF]:RANGe:AUTO?
Example: SPUR:POW:RF:LEV 10
SPUR:POW:RF:RANG:AUTO ON
5.27.7 Fast Spurious Meas
Pressing Fast Spurious Meas turns the fast spurious measurement test on or off. Pressing Fast
Spurious Meas
to On provides a faster method of execution as with fast spurious testing spurs
above the limit line are reported. Any spurs reported outside the limit will cause the
measurement to fail. See
“Abs Start Limit” on page 493 for more information.
Key Path:
Meas Setup
Saved State: Ref Level state is saved to instrument state. Ref Level value is
recalculated for each active range the value is not stored in instrument
state.
Factory Preset: Off
Range: Off|On
History: Add with firmware revision A.03.00
Remote Command:
[:SENSe]:SPURious:FSMeas OFF|ON|0|1
[:SENSe]:SPURious:FSMeas?
Example: SPUR:FSM ON