Agilent Technologies E4440A Saw User Manual


 
270 Chapter4
Instrument Functions: P - Z
System
Instrument Functions: P - Z
4.8.6.2 10 MHz Out
Switches the 10 MHz out signal on the rear panel of the analyzer on or off.
Key Path: System, Reference
State Saved: Not Saved in Instrument State. Not affected by factory preset or power
cycle. Reset to the factory default (Off, 10 MHz) by pressing System, Restore
Sys Defaults
.
Remote Command:
[:SENSe]:ROSCillator:OUTPut[:STATe] OFF|ON|0|1
[:SENSe]:ROSCillator:OUTPut[:STATe]?
Example: ROSC:OUTP ON
4.8.7 Show System
Displays the number and description of the options installed in your instrument. It also
displays the instrument model number, product number, serial number, ethernet address,
host ID, firmware revision, revision date, options, and system statistics.
Key Path:
System
Annunciation/
Annotation: Text Screen
Dependencies/
Couplings: Active function is disabled.
SCPI Status Bits/
OPC Dependencies: None
Factory Preset: Off
Remote Command:
*IDN? Returns four fields separated by commas:
Manufacturer
Model
Serial number
Firmware version
Example of returned string: Agilent Technologies,E4440A,US00000123,A.01.01
:SYSTem:OPTions?
*OPT?
Returns a string of all the installed instrument options. It is a comma separated list such
as: BAC,BAH.
Example: *IDN?