Agilent Technologies E4440A Saw User Manual


 
314 Chapter5
One-Button Measurement Functions
MEASURE (Spectrum Analysis Mode)
One-Button Measurement Functions
Remote Command:
Measurement Results Available
Command n Results Returned
:CONFigure:PSTatistic
:INITiate:PSTatistic
N/A Not Applicable
:FETCh:PSTatistic[n]?
:MEASure:PSTatistic[n]?
:READ:PSTatistic[n]?
n=1 (or not
specified)
Returns 10 scalar results, in the following order.
1. Average input power (in dBm)
2. Probability at the average input power (in%)
3. Power level that has 10% of the power
4. Power level that has 1% of the power
5. Power level that has 0.1% of the power
6. Power level that has 0.01% of the power
7. Power level that has 0.001% of the power
8. Power level that has 0.0001% of the power
9. Peak power (in dB)
10. Count
n=2 Returns a series of 501 floating point numbers (in
percent) that represent the current measured
power statistics trace. This is the probability at
specific power levels (average power), in the
following order:
1. Probability at 0 dB power
2. Probability at 0.1 dB power
3. Probability at 0.2 dB power
501. Probability at 50.0 dB power
n=3 Returns a series of 501 floating point numbers (in
percent) that represent the Gaussian trace. This is
the probability at specific power levels (average
power), in the following order:
1. Probability at 0 dB power
2. Probability at 0.1 dB power
3. Probability at 0.2 dB power
501.Probability at 50.0 dB power