Agilent Technologies E4440A Saw User Manual


 
326 Chapter5
One-Button Measurement Functions
MEASURE (Spectrum Analysis Mode)
One-Button Measurement Functions
Using Total Power
Reference
n=5 Total Power Reference
Returns 12 scalar values (in dBm) of the absolute
power of the segment frequencies:
1. Total power reference (dBm)
2. Reserved for the future use, returns –999.0
3. Negative offset frequency (A)
4. Positive offset frequency (A)
11.Negative offset frequency (E)
12.Positive offset frequency (E).
Using Power Spectral
Density Reference
n=5 Power Spectral Density Reference
Returns 12 scalar values (in dBm/Hz) of the absolute
power of the segment frequencies:
1. Total power reference (dBm/Hz)
2. Reserved for the future use, returns –999.0
3. Negative offset frequency (A)
4. Positive offset frequency (A)
11.Negative offset frequency (E)
12.Positive offset frequency (E).
Using Total Power
Reference
n=6 Total Power Reference
Returns 12 scalar values (in dBc) of the power relative
to the carrier at the segment frequencies:
1. Reserved for the future use, returns –999.0
2. Reserved for the future use, returns –999.0
3. Negative offset frequency (A)
4. Positive offset frequency (A)
11.Negative offset frequency (E)
12.Positive offset frequency (E).
Using Power Spectral
Density Reference
n=6 Power Spectral Density Reference
Returns 12 scalar values (in dBc/Hz) of the power
relative to the carrier at the segment frequencies:
1. Reserved for the future use, returns –999.0
2. Reserved for the future use, returns –999.0
3. Negative offset frequency (A)
4. Positive offset frequency (A)
11.Negative offset frequency (E)
12.Positive offset frequency (E).
Measurement Results Available (Continued)
Command /
Condition
n Results Returned