Filter
Top Products
Chapter 5 439
One-Button Measurement Functions
Meas Setup (Multi-Carrier Power—MCP)
One-Button Measurement Functions
Range: 0 MHz to 45 MHz
History: Added with firmware revision A.02.00
Remote Command:
[:SENSe]:MCPower:OFFSet:LIST:[FREQuency]<Hz>,<Hz>,<Hz>
[:SENSe]:MCPower:OFFSet:LIST:[FREQuency]?
Example: MCP:OFFS:LIST:5MHz,7.5MHz,15MHz
MCP:OFFS:LIST:?
5.19.4.3 Offset Integ BW
Sets the bandwidth over which the power is integrated for the selected offset (refer to
“Offset” above).
Key Path:
Meas Setup, Offset/Limits
Key Notes: If RRC Filter is set to On, the actual integration bandwidth used is the
displayed integration bandwidth multiplied by (1 + Filter Alpha).
State Saved: Saved in instrument state.
Factory Preset: 3.84 MHz, 3.84 MHz, 3.84 MHz
Terminators: Hz, kHz, MHz, GHz
Default Terminator: Hz
Knob Increment: Span ÷ 50
Step Key
Increment: If
CF Step(Auto) is selected: span/10
If CF Step(Man) is selected: CF Step
Range: 100Hzto20MHz
History: Added with firmware revision A.03.00
Remote Command:
[:SENSe]:MCPower:OFFSet:LIST:BANDwidth|BWIDth:[INTegration]<Hz>,<Hz>,<Hz>
[:SENSe]:MCPower:OFFSet:LIST:BANDwidth|BWIDth:[INTegration]<Hz>,<Hz>,<Hz>
Example: MCP:OFFS:LIST:BWIDth 5MHz,3MHz,5MHz
MCP:OFFS:LIST:BWID?
5.19.4.4 Upper Offset Limit
Sets the limit for the selected offset (refer to
“Offset” above) to the right of the carriers.