Agilent Technologies E4440A Saw User Manual


 
578 Chapter8
Using the STATus System
STATus Subsystem
Using the STATus System
Condition register will set the corresponding bit in the Questionable
Frequency Event register when the condition register bit has a negative
transition (1 to 0). The variable <number> is the sum of the decimal
values of the bits that you want to enable.
Key Type: There is no equivalent front panel key.
Factory Preset: 0
Range: 0 to 32767
Questionable Frequency Positive Transition
:STATus:QUEStionable:FREQuency:PTRansition <number>
:STATus:QUEStionable:FREQuency:PTRansition?
This command determines which bits in the Questionable Frequency
Condition register will set the corresponding bit in the Questionable
Frequency Event register when the condition register bit has a positive
transition (0 to 1). The variable <number> is the sum of the decimal
values of the bits that you want to enable.
Key Type: There is no equivalent front panel key.
Factory Preset: 32767 (all 1’s)
Range: 0 to 32767
Questionable Integrity Register
Questionable Integrity Condition
:STATus:QUEStionable:INTegrity:CONDition?
This query returns the decimal value of the sum of the bits in the
Questionable Integrity Condition register.
NOTE The data in this register is continuously updated and reflects the
current conditions.
Key Type: There is no equivalent front panel key.
Questionable Integrity Enable
:STATus:QUEStionable:INTegrity:ENABle <number>
:STATus:QUEStionable:INTegrity:ENABle?
This command determines which bits in the Questionable Integrity