Filter
Top Products
484 Chapter5
One-Button Measurement Functions
Marker (Spectrum Emissions Mask—SEM)
One-Button Measurement Functions
5.26.2 Normal
Sets the control mode for the selected marker to Normal (see “Select Marker” on page 483). If
the marker is off, a single marker is activated and placed on the screen to the right of the
measurement graph. You can then adjust the trace point of the marker using the knob,
numeric keypad, or
keys.
Key Path:
Marker
Factory Preset: Off
History: Remote command updated with firmware revision A.03.00
Remote Command:
See
“Marker (Spectrum Emissions Mask—SEM)” on page 483 for the mode command.
Example: CALC:SEM:MARK:STAT ON selectsmarker1andsetsitto
Normal.
5.26.3 Off
Turns off the selected marker. In addition, Off also turns off functions related to the
selected marker.
Key Path:
Marker
Factory Preset: Off
History: Remote command updated with firmware revision A.03.00
Remote Command:
See
“Select Marker” on page 483 for the command to select the control mode.
Example: CALC:SEM:MARK3:STAT OFF selects marker 3 and sets it to
Off.