Filter
Top Products
Chapter 5 371
One-Button Measurement Functions
Meas Setup (Burst Power)
One-Button Measurement Functions
5.8 Meas Setup (Burst Power)
When Burst Power has been selected in the Measure menu of the Spectrum Analysis Mode,
this key displays the appropriate measurement setup menu.
The burst power measurement is an accurate method of determining the average power for
the specified burst.
Key Path: Front-panel key
History: Added with firmware revision A.02.00
Remote Command:
There is no equivalent remote command.
5.8.1 Avg Number
Press Avg Number (On) to specify the number of measurement averages used when
calculating the measurement result. The average is displayed at the end of each sweep.
Key Path:
Meas Setup
State Saved: Saved in instrument state.
Factory Preset: 10 averages / Off
Range: 1 to 1000
History: Added with firmware revision A.02.00
Remote Command:
[:SENSe]:BPOWer:AVERage:COUNt <integer>
[:SENSe]:BPOWer:AVERage:COUNt?
[:SENSe]:BPOWer:AVERage[:STATe] OFF|ON|0|1
[:SENSe]:BPOWer:AVERage[:STATe]?
Example: BPOW:AVER:COUN 100
BPOW:AVER ON