Filter
Top Products
Page 8 - 2
Maintenance F - 160 CE Operation and Maintenance Manual
© GBC Films Group April 2000
Semi-Annual
• Lubricate the grease fittings, chain, and gears.
( performed by service technician )
• Check wire termination tightness.
( performed by service technician )
ELECTRICAL
SHOCK
Remove power from the laminator before
servicing. You can be severely shocked,
electrocuted or cause a fire.
8.2 Cleaning the rollers
Tools required
• Adhesive coated boards
( picks up dust and particles off of the rolls )
• Protective rubber gloves
( This will protect your hands from the isopropyl
alcohol )
• 80% isopropyl alcohol
( a mild dishwashing detergent and water may
be used instead )
• Rubber cement eraser
( a belt sander dressing block may be used
instead )
• Several 100% cotton terry cloths
( best for lint free cleaning )
Preparation of the laminator
a) Turn the MAIN POWER to the “ I ”
position.
Power
ON/OFF
b) Press machine RESET.
Machine reset