Filter
Top Products
Page 5 - 21
Operations
F - 160 CE Operation and Maintenance Manual
© GBC Films Group April 2000
l) On the control panel press FWD ▲ for a
forward motor direction. Nip is now set.
FWR
REV.
STOP
GO
SPEED
SAFETY
00.0
5.5.2 Pull roller manual nip
adjustment
If the main laminating rollers are heated,
mounting application may be run from the
rear operating position of the machine.
INFORMATION
a) Turn the MAIN POWER to the “ I ”
position.
Power
ON/OFF
b) Press RESET. The front control panel will
illuminated.
Machine reset
c) Press SEL.
JOB
STANDBY
SAV
0
SEL
= Flashing
d) Press FWD ▲ for a forward motor direction.
SPEED
SAFETY
FWD
REV
00.0
GO
STOP