Filter
Top Products
Safety
Page 1 - 5
F - 160 CE Operation and Maintenance Manual
© GBC Films Group April 2000
Press RESET located on the right leg at the front
of the machine. Refer to Figure 1.4.4 Machine reset.
Figure 1.4.4 Machine rest
Machine reset
1.5 Emergency cable
In the event an E-STOP is not reachable, use
your foot to activate an emergency cable ( E-CABLE )
located at the base of the stand from the front or rear of
the machine. Refer to Figure 1.5.1 Emergency cable.
INFORMATION
The machine will only operate if the
E-CABLE is in the unlatched position.
Figure 1.5.1 Emergency cable
Front
Rear
Emergency cable
Emergency cable
To continue operation, press in on the cable reset
located on the right leg of the front operating position.
Refer to Figure 1.5.2 Reset the E-CABLE.
Figure 1.5.2 Reset the E-CABLE
Push in