Filter
Top Products
Page 6 - 6
Applications
© GBC Films Group April 2000
F - 160 CE Operation and Maintenance Manual
Parameter Chart 1 - Precoating substrates
TEMPERATURE
GAP & PRESSURE
MOTOR DIRECTION & SPEED
TOP TEMP. BOT. TEMP.
PRESSURE
GAP
SPEED
FWD
REV.
GO
GO
= Panel
SOLID
FLASHING
= Footswitch
PULL ROLL SETTINGS
NOTES
N / A
1/4 Turn
1/2 Turn
3/4 Turn
PRESSURE
MATERIALS
UPPER UNWIND :
LOWER UNWIND :
SUBSTRATE :
PRINTS :
Pro Mount
N / A
1/4" Foam Core
N / A
68 68
1/4"
00.0
Pro Mount can be substituted with a similar product. Substrate can vary. GAP will be dependent on the
substrate thickness. Pressure will be determined by operator. Speed is not indicated in Footswitch mode.
Because the process is described from the front of the laminator, motor direction is FWD and the pull rolls are
not required for this application.
DOWN
UP