Filter
Top Products
Page 4 - 22
Installation F - 160 CE Operation and Maintenance Manual
© GBC Films Group April 2000
4.10.4 E-CABLE
a) Press GO. The bottom rollers begin turning.
SPEED
SAFETY
FWD
REV
6.0
GO
STOP
b) Press PRESSURE ▼ to illuminate 3 bars in
the pressure dsiplay.
0
GAP
PRESSURE
c) Press on the front E-CABLE with your foot.
The bottom rollers stop, the upper main roller
raises and the control panel is blank.
d) Latch the E-CABLE by pushing in on the E-
CABLE reset located in the front at the bottom
of the control side leg.
Push in
e) Press machine RESET. The front control panel
is illuminated.
Machine reset
f) Repeat steps “ a ” through “ e ” for the
rear E-CABLE.