Filter
Top Products
Page 5 - 22
Operations F - 160 CE Operation and Maintenance Manual
© GBC Films Group April 2000
e) Press SPEED ▲ to 5.
SPEED
SAFETY
FWD
REV
5.0
GO
STOP
f) Bring the footswitch around to the rear of the
laminator.
Caution should always be exercised
when using the laminator with
the safety shields raised.
You can be seriously HURT or INJURED!
WARNING
g) Raise the rear safety shield.
h) Position the leader board in the center of the
pull rollers between the nip.
CAUTION
Sharp edges on a substrate should be filed
smooth and GAP manually adjusted.
Sharp edges can CUT the rollers!
WARNING
Keep hands and fingers clear of the pull
roller nip when changing the gap.
You can be CRUSHED!
i) At eye level with the pull rollers, turn the pull
roll crank handle clockwise until you see the
upper pull roller make contact with the
substrate.
DOWN
CAUTION
Excess pressure can damage the laminating
rollers. Always use the minimum roll
pressure necessary to complete the task.