Filter
Top Products
Page 5 - 3
Operations
F - 160 CE Operation and Maintenance Manual
© GBC Films Group April 2000
( 11 ) GAP ▼ : When pressed, will decrease the gap by
1/16 in. increments. If held down, it will automatically
decrease the gap by 1/16 in. increments until it has reached
a minimum opening of 0 in. on the GAP DISPLAY.
1/16
GAP
PRESSURE
11
( 12 ) PRESSURE DISPLAY : Displays the amount of
pressure being used. Each bar represents 10% of the
maximum allowable pressure. All ten bars illuminated
equals 100% of the maximum allowable pressure.
1/16
GAP
PRESSURE
12
INFORMATION
When adjusting the pressure, the gap
will be affected as well.
( 13 ) PRESSURE ▲ : When pressed once, will
decrease the pressure by 5%. If held down, it will decrease
from 100% of the maximum allowed pressure to 0% at
which point no bars will be illuminated.
1
GAP
PRESSURE
13
WARNING
Keep hands and fingers clear of
the laminator roller nip when
adjusting PRESSURE.
You can be CRUSHED or BURNED!
( 14 ) PRESSURE ▼ : When pressed once, will increase
the pressure by 5%. If held down, it will increase from
0% of the minimum allowed pressure to 100% at which
point all bars will be illuminated.
0
GAP
PRESSURE
14