Filter
Top Products
Page 4 - 7
InstallationF - 160 CE Operation and Maintenance Manual
© GBC Films Group April 2000
Figure 4.5.1 Disassembling of the crate
P
l
a
n
e
4
P
l
a
n
e
4
P
l
a
n
e
4
1
2
3
4
5
Removing the shrink wrap
a) Gently unwrap the shrink wrap from around the
laminator.
CAUTION
Do not use a knife or other sharp object to
remove the shrink wrap from around the
laminator. You can cause irreparable
damage to the rollers.
b) Move all packing materials to a safe distance.
Moving the laminator
a) Have the laminator rolled off the skid and
placed on the floor by licensed riggers. The ramps
included with the laminator can be secured utilizing
screws removed from the disassembled crate.
Figure 4.5.2 illustrates positioning of the ramps.
WARNING
Do not attempt to use the ramps if they are
not secured to the pallet. Ensure the pallet is
on a flat even surface before attempting to
roll the machine off.
Figure 4.5.2 Positioning of the ramps