Filter
Top Products
Page 4 - 28
Installation F - 160 CE Operation and Maintenance Manual
© GBC Films Group April 2000
c) Press down on the variable speed footswitch.
GO begins flashing and the bottom rollers are
turning.
ATTUNG
WARNING
ADVERTENCIA
INFORMATION
Footswitch speed is not indicated in the
SPEED DISPLAY on the control panel.
4.11.3 Unwind shafts and
unwind brakes
The unwind shafts swing out and the unwind
brakes tension the turning of the shaft from no tension to
complete stop tension.
Should you detect or experience complications
with the unwind shaft movement or the unwind brake
tension, call you local area service representative.
Caution should always be exercised
when using the laminator with
the safety shields raised.
You can be seriously HURT or INJURED!
WARNING
a) Raise the rear safety shield.
b) Lift the clevis pin up from the saddle of the
upper unwind shaft.
Clevis pin
Saddle
c) Swing the upper unwind shaft to its fully
extended position. Swing back and reseat the
shaft in the saddle. The swing movement should
be smooth and easy.
d) Ensure that the upper unwind brake adjustment
knob is backed off completly. The counter
clockwise turn should be easy.