Filter
Top Products
Page 4 - 26
Installation F - 160 CE Operation and Maintenance Manual
© GBC Films Group April 2000
p) Press STOP. The bottom rollers stop turning.
SPEED
SAFETY
FWD
REV
15.0
GO
STOP
q) Press SPEED ▼ once. SPEED DISPLAY
decreases in increments of .5 per press down to
00.0.
SPEED
SAFETY
FWD
REV
00.0
GO
STOP
r) The TOP TEMP DISPLAY and BOT TEMP
DISPLAY are solid indicating the actual
temperature is within a +/- 6
o
F of the set point
temperature.
120 120
TOP TEMP BOT TEMP
Caution should always be exercised
when using the laminator with
the safety shields raised.
You can be seriously HURT or INJURED!
WARNING
s) Raise the front safety shield, remove the front
feed table.
t) Touch the upper and lower main rollers. They
should feel warm to the touch.
u) Replace the front feed table and lower the
front safety shield.
INFORMATION
The SAFETY indicator should not be
flashing when the tables are properly
seated and the safety shields are in
the closed position..