Filter
Top Products
Page 4 - 24
Installation F - 160 CE Operation and Maintenance Manual
© GBC Films Group April 2000
e) Press GAP ▲. GAP DISPLAY increases
1/16th of an inch per press. The upper main roll
moves accordingly. Once to “1”, the upper
main roller stops.
0-1
GAP
PRESSURE
f) Press and hold PRESSURE ▼. The upper
main roller travels in a constant downward
motion. Once making contact with the lower
main roller, the bars turn solid one at a time until
all 10 bars are solid.
0
GAP
PRESSURE
g) Press and hold PRESSURE ▲. The upper
main roller travels in a constant upward motion.
The pressure bars turn hollow one at a time until
no bars are solid and GAP DISPLAY changes
to “ 1 ” then stops.
1
GAP
PRESSURE
h) Press JOB ▲. The JOB DISPLAY increases
in increments of 1 to 9.
JOB
STANDBY
SEL SAV
9
i) Press JOB ▼ . The JOB DISPLAY should
decreases in increments of 1 from 9 to 0.
JOB
STANDBY
SEL SAV
0
INFORMATION
To continue with the function checks, you
must press SEL so that it discontinues
flashing.