Filter
Top Products
Page 4 - 13
InstallationF - 160 CE Operation and Maintenance Manual
© GBC Films Group April 2000
f) Flip the circuit breaker on the laminator to the up
position.
= ON
= OFF
g) Turn MAIN POWER to “ I ” position.
Power
ON/OFF
Ensure all E-STOPS are unlatched and
the E-CABLE is reset before turning
power on to the laminator.
INFORMATION
h) Press RESET. The front control panel should
be illuminated at this point.
Machine reset
Caution should always be exercised
when using the laminator with
the safety shields raised.
You can be seriously HURT or INJURED!
WARNING
i) Raise the front safety shield. The SAFETY
indicator will begin flashing.
SPEED
SAFETY
FWD
REV
00.0
GO
STOP
= Flashing