Filter
Top Products
Page 5 - 23
Operations
F - 160 CE Operation and Maintenance Manual
© GBC Films Group April 2000
Excessive pressure will cause the
substrate to bow or flatten.
INFORMATION
Refer to Figure 5.5.2 for proper roller
pressure.
INFORMATION
Figure 5.5.2 Pull roller pressure
Leader board
Proper
pressure
Leader board
Excessive
pressure
Density of the substrate will determine the
amount of pressure you may use.
INFORMATION
WARNING
When operating the laminator using the
variable speed footswitch, keep hands and
fingers away from the nip of the rollers.
You may be CRUSHED or BURNED!
j) Step on the variable speed footswitch to back
the leader board out.
Speed is controlled through the variable
speed footswitch when the safety shield
is in the raised position.
CAUTION
k) The pull roller nip has now been manually set.