Filter
Top Products
Page 5 - 11
Operations
F - 160 CE Operation and Maintenance Manual
© GBC Films Group April 2000
5.2.2 Resume operation
a) Reset the E-STOP or the E-CABLE.
-Resetting the E-STOP
Unlatch
-Resetting the E-CABLE
Push in
The laminator will only turn on if all
E-STOPS are unlatched and
the E-CABLE is reset.
INFORMATION
b) Press machine RESET. All parameters have
defaulted.
Machine reset
INFORMATION
Once RESET has been engaged, power will
be restored, Laminating rollers will reset to
1 in. GAP and the display will return to it's
default settings.
Default mode; TOP TEMP. = 68
o
F ( 20
o
C ),
BOT. TEMP. = 68 oF ( 20 oC ), GAP = 1 in.,
PRESSURE = no bars are solid, JOB = 0, no
motion direction selected, SPEED = 00.0 and
SLEEP = flashing
c) Enter the desired operating parameters or
select the job number prior to the emergency
stop situation.
d) You may now resume operating the laminator.