Trilogy200 clinical manual
104
To turn the ventilator o from a Ventilator Inoperative condition,
use the normal power o sequence. When the Start/Stop button is
selected, the following screen will display.
Select the Right button (Yes) to turn the ventilator o and stop the
audible alarm. Selecting the Left button (No) will return the screen to
the Ventilator Inoperative Alarm Screen without silencing the audible
alarm.
Remote Alarm
When the ventilator detects an alarm condition, if you are using a
remote alarm system, a signal is sent from the ventilator to activate the
remote alarm. The Remote Alarm is discussed in Chapter 4.
Ventilator Inoperative Power
O Screen