Philips 200 Work Light User Manual


 
Trilogy200 clinical manual
18
9
5
7
8
6
10
11
12
Rear Panel
5. Serial Connector
You can use this connector to connect the device to a computer
running PC Direct or Sleepware software or to other Philips
Respironics devices such as Alice 5 and AOM. Use the Trilogy
RS232 Serial Cable to connect the ventilator to the external
device or computer.
6. Remote Alarm/Nurse Call Connector
If you are using an optional remote alarm or nurse call system
with the ventilator, you can connect the Philips Respironics
remote alarm adapter cable or nurse call adapter cable to this
connector.
7. Ethernet Connector (when available)
You can connect a PC or router to this connector to upload
therapy information to a secure web site so you can review
therapy information remotely or remotely troubleshoot and
service the device.
8. External Battery Connector (DC Power Inlet)
You can connect an external, stand-alone lead acid battery here,
using the Trilogy External Battery cable.
9. Oxygen (O
2
) Inlet Connector
If using low ow supplemental oxygen, connect the oxygen
source to this connector using one of the O
2
Inlet Quick Connects
provided with the device.
10. Air Inlet and Filter
Insert the lter supplied with the device into the air inlet.
11. Detachable Battery Pack Slot
If you are using the Philips Respironics Lithium-Ion detachable
battery pack to power the device, attach it here.
12. Cord Retainer
Secure the power cord using the cord retainer to prevent
someone from accidentally disconnecting the power cord. See
Chapter 4 for more information.