Filter
Top Products
FOR CLINICIAN’S USE ONLY
Accessing Prescription Setting Screens
Full Menu Access Mode
The ventilator has two levels of menu access, Full and Limited. Full
Menu Access allows you to alter all available settings. Limited Menu
access permits the user to alter only those prescription parameters
that aect patient comfort, such as Rise Time, Flex, and Ramp Start
Pressure, if those parameters are available as part of the prescription.
The ventilator defaults to Full Menu Access mode.
After accessing the Main Menu, if the device is in Limited Menu
Access mode, you can use the following Setup key sequence to enter
Full Menu Access mode and be able to change prescription settings:
• Press the Down button and the Alarm Indicator/Audio
Pause button simultaneously for several seconds. This will
temporarily place the device in Full Menu Access mode.
When you perform this key sequence from the Monitor screen,
the Main Menu screen appears and an audible indicator sounds
indicating you are now in Full Menu Access mode.
When you perform this key sequence when the airow is o, the
Setup screen appears and an audible indicator sounds.
You can go into the Options menu and permanently change the
Menu Access setting to Full Menu Access. Otherwise, the device
will return to the Menu Access mode stored in the setting once you
exit the menu screens or if one minute passes without pressing any
device buttons. If you are in the Setup mode, and an SD card is in the
device, “Write Event Log to SD Card” will appear in the menu.
Note: The Full Menu Access key
sequence can be performed
either from the Power O screen
or from the Monitor screen.
Note: When the airow is o
and AC power is removed from
the device for more than 5
minutes, the device will enter
a low power mode to save
battery life. When the device is
in low power mode, the Setup
key sequence will be ignored.
Press the Start/Stop button, or
connect AC power, or insert an
SD card to exit the low power
mode.
Note: Philips Respironics
recommends that after you are
nished changing prescription
settings, and you give the
device to the patient, you set
the device back to Limited
Menu Access mode so
patients cannot change their
prescription settings.
WARNING
The information on this page is ONLY for health care professionals. Remove this page from the manual
before giving the manual to the patient!