Philips 200 Work Light User Manual


 
Trilogy200 clinical manual
88
- Dim: The display’s backlight is decreased, so that the display
is still visible but not as bright.
If enabled, the screen saver will display after 5 minutes of no
keypad activity. Pressing any button on the device will exit the
screen saver. And, any alarm or informational message will also
exit the screen saver.
Date Format – You can choose either mm/dd/yyyy or
dd/mm/yyyy as the date format that will display on the
device screens.
Time Format – You can choose to display either an AM/
PM time format or 24 Hour time format (for example,
2:49 PM or 14:49).
Month – The month defaults to the current month. The
adjustable range is from 1 (January) – 12 (December).
Day – The day defaults to the current day. The adjustable
range is from 1 – 31. The maximum value is based on the
selected month.
Year – The year defaults to the current year. The
adjustable range is from 2000 – 2099.
Hour – The hour defaults to the current hour. The
adjustable range is from 12 AM – 12 PM or 0-23,
depending on the selected Time Format.
Minute – The minute defaults to the current minute. The
adjustable range is from 0 – 59.
IP Address Mode – You can change the IP address
mode to either DHCP or Static, depending on the type of
network you are using (if applicable).