Philips 200 Work Light User Manual


 
Chapter 5 Viewing and Changing Settings
73
Changing the Device Settings and Alarms
From the Main Menu screen, use the Up/Down button to highlight
the Settings and Alarms menu, and press the Right button to select
the menu.
Device Settings Common to All Therapy Modes
Some of the settings on this menu will vary depending on the
therapy mode you select. The section below describes all of the
settings that are common to all therapy modes.
Dual Prescription Setting
You can turn the dual prescription setting on or o. Enable the
setting if you want to create two separate prescriptions for the
patient. For instance, you may want to set up a daytime prescription
and then a separate nighttime prescription. If you enable this setting,
then the menu options on the Main Menu will change to include
three new options:
Switch to Primary/Secondary Settings
Primary Settings and Alarms
Secondary Settings and Alarms
The Main Menu screen will look like the screen below.
Main Menu Screen with Dual
Prescription Enabled
Note: In the Options menu
described later in this chapter,
you can specify the Pressure
Units displayed by the device,
choosing either cm H
2
O, hPa, or
mBar. The default setting is
cm H
2
O, so this manual uses cm
H
2
O throughout.