Philips 200 Work Light User Manual


 
Chapter 7 Cleaning and Maintenance
123
Replacing the Air Inlet Path Foam
Follow your institution’s protocol for how often you replace the air
inlet path foam. To replace the foam, complete the steps below.
1. Using a screwdriver, remove the air inlet path cover by
unscrewing the four screws as shown below.
2. Remove the gray foam air inlet path by hand. The removed air
inlet path is shown below.
Air Inlet Path Foam
Air Inlet Path Cover
Air Inlet Path
Compartment
Removing the Air Inlet Path
Cover
Removing the Air Inlet Path
Foam