Philips 200 Work Light User Manual


 
Trilogy200 clinical manual
72
Changing and Viewing Settings in Full Menu
Access Mode
Clinicians can view and change settings using the Menu screens
when the device is in Full Menu Access mode. To enter the Menu
screens from the Monitor screen, press the Up button on the
ventilator. The Main Menu screen shown below appears.
Choose from the following selections on the Main Menu screen:
Safely Remove SD Card - This option will appear if an SD
card is inserted in the ventilator. Select this option when
you want to remove the SD card. When the “Remove SD
Card” conrmation message appears, remove the card.
If you press the left (cancel) button or don’t remove the
card within 30 seconds, the conrmation message will
close and the ventilator will continue writing to the card.
Settings and Alarms: View and change prescription
settings and alarms.
Options: View and change device settings, such as Full or
Limited Access mode, Detailed View, Language, etc.
Alarm Log: View a list of the 20 most recent alarms that
have occurred.
Event Log: View a list of all events that have occurred,
such as ventilator setting changes, ventilator inoperative
conditions, alarms, etc.
Information: View detailed information about the device,
such as the device’s software version and serial number.
Note: For some therapy
settings, once you reach the
highest or lowest setting
available, pressing the Up/
Down button again will cycle
back through the settings.
For the parameters that do
not wrap, when you reach
the highest or lowest setting
possible, a “Limit Reached”
message appears in the Menu
Banner on-screen.
Main Menu Screen Example
Note: In the example Main
Menu screen shown, the 2/6
that appears in the Menu
banner indicates that item 2 is
highlighted from a total of 6
items in the menu.
Note: If you change a setting
but decide you do not want to
save it, you can press the Left
button to cancel the change.