Trilogy200 clinical manual
136
2. Push the SD card completely into the card slot until the card
clicks into place.
To remove the SD card, select the “Safely Remove SD Card” option
from the main menu. After the “Remove SD Card” conrmation
message appears, remove the card by pushing the card in until the
card clicks to release. The card will be slightly ejected from the device.
Using the Philips Respironics DirectView
Software
You can use the Philips Respironics DirectView software to download
the prescription data from the SD card to a computer. DirectView
can be used by clinicians to receive and report stored data from
the SD card. DirectView does not perform any automatic scoring or
diagnosing of a patient’s therapy data.
Note: Remote prescription changes are not permitted.
Using the Optional In-Use Bag
An optional, in-use bag is included for use with the ventilator. The
in-use bag is required for portable use in order to properly secure
the ventilator. See the instructions included with the in-use bag for
details on how to use the bag with your device.
Note: The SD card does not
need to be installed for the
device to work properly.
Inserting the SD Card
Note: Use only SD cards
available from Philips
Respironics or the type listed in
the specications section of this
manual.