Filter
Top Products
Preface
RS400 13 ROS™ v3.5
Preface
This manual contains instructions, examples, guidelines, and general theory on how to use the
Rugged Operating System (ROS™) management software.
Supported Platforms
ROS™ has been designed to work on many RuggedCom product hardware platforms. This
ensures consistency of the user experience when migrating from one product model to another.
In fact, a single ‘binary’ image supports all RuggedCom ROS™ based products that includes:
• RuggedSwitch™ i800, i801, i802, and i803
• RuggedSwitch™ RS8000 and RS1600
• RuggedSwitch™ RS900/RS930 with both ‘L’ (EoVDSL) and ‘W’ (WLAN) port variants
• RuggedSwitch™ RS900G/RS940G with Gigabit
• RuggedSwitch™ RS969/M969 waterproof with Gigabit
• RuggedSwitch™ RSG2100/M2100 and RSG2200/M2200 modular switches with Gigabit
• RuggedServer™ RS416, RS910 and RS920 modular servers
• RuggedServer™ RS400
• RuggedServer™ RMC30
Each product model has a subset of the entire ROS™ feature set. This manual is intended for
use with the RS400 product model(s) and has been streamlined to only describe the relevant
features.
Who Should Use This User Guide
This guide is to be used by network technical support personnel who are familiar with the
operation of networks. Others who might find the book useful are network and system planners,
system programmers and line technicians.
How Chapters are organized
The index of this guide has been prepared with:
• Entries to each of the “Features” sections of the manual
• Entries to each of the “Troubleshooting” sections of the manual (located at the end of each
chapter)
• Entries to each of the Menus, organized by name
Document Conventions
This publication uses the following conventions:
Note: Means reader take note. Notes contain helpful suggestions or references to materials not
contained in this guide.
It is recommended that you use this guide along with the following applicable documents: