Filter
Top Products
Administration
ROS™ v3.5 28 RS400
1.6 IP Gateways
These parameters provide the ability to configure gateways. A maximum of 10 gateways can be
configured. When both the Destination and Subnet fields are both 0.0.0.0 (displayed as blank
space), the gateway is a default gateway.
Figure 9: IP Gateways Form
Destination
Synopsis: ###.###.###.### where ### ranges from 0 to 255
Default: 0.0.0.0
Specifies the IP address of the destination device. An IP address is a 32-bit number that is
notated by using four numbers from 0 through 255, separated by periods.
Subnet
Synopsis: ###.###.###.### where ### ranges from 0 to 255
Default: 0.0.0.0
Specifies the IP subnet mask of the destination. An IP subnet mask is a 32-bit number that is
notated by using four numbers from 0 through 255, separated by periods. Typically, subnet
mask numbers use either 0 or 255 as values (e.g. 255.255.255.0) but other numbers can
appear.
Gateway
Synopsis: ###.###.###.### where ### ranges from 0 to 255
Default: 0.0.0.0
Specifies the gateway IP address. The gateway address must be on the same IP subnet as this
device.
Note: The default gateway configuration will not be changed when resetting all configuration parameters
to defaults.