Filter
Top Products
PPP over Modem
RS400 227 ROS™ v3.5
11.2.2 PPP Control
Figure 158: PPP Control Form
PPP Status
Synopsis: { Disabled, Enabled }
Default: Disabled
Whether PPP is disabled or enabled.
Local IP Address
Synopsis: ###.###.###.### where ### ranges from 0 to 255
Default: 192.168.1.1
This parameter specifies the IP address of the local side of the PPP link. Note that local and
remote PPP addresses must be on the same subnet and that this subnet must be different from
the management network address.
Remote IP Address
Synopsis: ###.###.###.### where ### ranges from 0 to 255
Default: 192.168.1.2
This parameter specifies the IP address of the remote side of the PPP link. Note that local and
remote PPP addresses must be on the same subnet and that this subnet must be different from
the management network address.
Subnet
Synopsis: ###.###.###.### where ### ranges from 0 to 255
Default: 255.255.255.0
This parameter specifies the IP subnet mask of this local and remote PPP addresses.