Filter
Top Products
VLANs
ROS™ v3.5 178 RS400
• NOTE: Do not attempt to change the “VLAN-aware” parameter of the managed switch by
applying a configuration (.CSV) file update. Configuration file updates are used to apply
“bulk changes” to the current configuration of a switch. Instead, a change to this individual
parameter MUST first be applied separately from any other table (i.e. parameter) changes.
In other words, configuration file updates should exclude the “VLAN-aware” parameter.
6.3.2 Static VLANs
Figure 119: Static VLANs Table
Figure 120: Static VLANs Form
VID
Synopsis: 1 to 4094
Default: 1