Filter
Top Products
Administration
ROS™ v3.5 26 RS400
Figure 8: IP Interfaces Form
Note: The IP address and mask configured for management VLAN are not changed when resetting all
configuration parameters to defaults and will be assigned to default VLAN ID of 1. Changes to the
IP address take effect immediately. All IP connections in place at the time of an address change
will be lost.
Type
Synopsis: { VLAN }
Default: VLAN
Specifies the type of the interface for which this IP interface is created.
ID
Synopsis: 1 to 4094
Default: 1
Specifies the ID of the interface for which this IP interface is created. If interface type is VLAN,
represents VLAN ID.
Mgmt
Synopsis: { No, Yes }
Default: No
Specifies whether the IP interface is the device management interface.
IP Address Type
Synopsis: { Static, Dynamic, DHCP, BOOTP }
Default: Static
Specifies whether the IP address is static or dynamically assigned via DHCP or BOOTP. Option